|
|
EIZO RadiForce MX217 2MP 21.3-inch Monitor
|
|
Price: $1789.00
Manufacturer:
EIZO
21.3" (54.0 cm), 1200 x 1600, Color (IPS), 500 cd/m2, 20 ms, DisplayPort, DVI-D, 23 W
|
|
Availability
|
Ottawa Store: Inquire Online Here
National Warehouse (Shipping Availability):
Usually Ships in 24-48 Hours
|
|
|
|
| Product # |
Manufacturer # |
UPC # |
Status |
|
59697455
|
MX217-BK
|
690592058079 |
Active
|
Details
|
General Information |
|
Summary |
Hybrid Display of Monochrome and Color
The Hybrid Gamma PXL function automatically distinguishes between monochrome and color images pixel by pixel, creating a hybrid display where each pixel has optimum grayscale. As a result, monochrome images such as CT, MRI and X-ray are displayed in the ideal grayscale that corresponds to DICOM Part 14, while color images such as 3D rendering, nuclear medicine, ultrasound and endoscopy are faithfully reproduced corresponding to Gamma 2.2. This helps improve efficiency of viewing both monochrome and color images by displaying them together on the one screen.
Visual Assessment
37 per improvement en pictThe Kumamoto Chuo Hospital, Japan, have conducted a visual assessment of the Hybrid Gamma PXL function included on the RadiForce monitor. An improvement of approximately 37% was noted when comparing the use of a color monitor with Hybrid Gamma PXL to one without it. In addition, Hybrid Gamma PXL was found to operate equally as well as monochrome monitors with GSDF when displaying monochrome images.
Achieve Clarity True to the Source Data
A medical monitor needs to be capable of high brightness in order to meet performance standards. However, in order to achieve high brightness in an LCD panel, the pixel aperture ratio has to be increased. This causes a typically unavoidable decline in sharpness. With EIZO’s unique Sharpness Recovery technology, the decrease in sharpness (MTF) is restored. This allows you to display an image safely on the monitor that is true to the original source data, even at high brightness levels.
MTF measures numerically how faithfully the panel transfers detail from the original image data for viewing. When Sharpness Recovery is turned on, in the case of a 2 pixel line pair (spatial frequency of 0.926 cycles/mm) the MTF increases by over 50%.
Make the Precise Diagnosis
EIZO carefully measures and sets the grayscale at the factory to ensure each monitor is compliant with DICOM Part 14. Furthermore, at startup or upon wakeup, the EIZO patented drift correction function quickly stabilizes the brightness level and compensates the brightness fluctuations caused by the ambient temperature and the passage of time, allowing medical images to be faithfully reproduced with stable brightness and grayscale.
Elegant Cabinet Design
The monitor’s cabinet is designed with rounded corners and elegant curves on the back to present a gentle aesthetic and facilitate a comforting environment for patients and medical staff.
Improved Workflow
EIZO’s unique Work-and-Flow technology alleviates the complexity of the imaging workflow with functions developed with the radiologist in mind. Users can take advantage of Work-and-Flow functions with the RadiForce monitor and bundled RadiCS LE software.
Rotate the Monitor According to the Image
After installing the included RadiCS LE quality control software, you can link the Image Rotation Plus function with the monitor’s built-in gravity sensor. This enables the screen to automatically switch to either portrait or landscape mode based on the orientation of the monitor.
Hassle-Free Multi-Monitor Configuration
Using the DisplayPort connection, you can drive several monitors in a daisy chain sequence. This allows you to configure a multi-monitor setup without the complicated hassle of excessive cabling. A graphics board that supports daisy chain is necessary.
Manage Effortless Calibration
With the RadiCS LE software (included) and Integrated Front Sensor (IFS) built into the front bezel, you can easily calibrate to DICOM Part 14 without having to mount, run, and remove an external sensor. |
|
Display |
|
Display diagonal |
54.1 cm (21.3") |
|
Display resolution |
1200 x 1600 pixels |
|
Native aspect ratio |
3:4 |
|
Display technology |
LCD |
|
Touchscreen |
No |
|
HD type |
Not supported |
|
Panel type |
IPS |
|
Response time |
20 ms |
|
Screen shape |
Flat |
|
Contrast ratio (typical) |
1800:1 |
|
Maximum refresh rate |
60 Hz |
|
Display number of colours |
1.07 billion colours |
|
Display brightness (typical) |
500 cd/m² |
|
Viewing angle, horizontal |
178° |
|
Viewing angle, vertical |
178° |
|
Pixel pitch |
0.27 x 0.27 mm |
|
Viewable size, horizontal |
32.4 cm |
|
Viewable size, vertical |
43.2 cm |
|
Digital horizontal frequency |
31 - 100 kHz |
|
Digital vertical frequency |
59 - 61 Hz |
|
Display diagonal (metric) |
54 cm |
|
Performance |
|
NVIDIA G-SYNC |
No |
|
AMD FreeSync |
No |
|
Multimedia |
|
Built-in speaker(s) |
No |
|
Built-in camera |
No |
|
Design |
|
Market positioning |
Medical |
|
Product colour |
Black |
|
Feet colour |
Black |
|
Ports & interfaces |
|
Built-in USB hub |
Yes |
|
HDMI |
No |
|
Headphone out |
No |
|
Number of USB Type-B upstream ports quantity |
2 |
|
USB Type-A downstream ports quantity |
2 |
|
DVI-D ports quantity |
1 |
|
DisplayPorts quantity |
2 |
|
Ergonomics |
|
VESA mounting |
Yes |
|
Height adjustment |
Yes |
|
Panel mounting interface |
100 x 100 mm |
|
Swivelling |
Yes |
|
Swivel angle range |
0 - 70° |
|
Tilt adjustment |
Yes |
|
Tilt angle range |
-5 - 30° |
|
Power |
|
Power consumption (typical) |
23 W |
|
Power consumption (standby) |
0.5 W |
|
Power consumption (max) |
54 W |
|
Power consumption (PowerSave) |
0.6 W |
|
AC input voltage |
100 - 240 V |
|
AC input frequency |
50/60 Hz |
|
Weight & dimensions |
|
Width (with stand) |
356.5 mm |
|
Depth (with stand) |
260.5 mm |
|
Height (with stand) |
506.2 mm |
|
Weight (with stand) |
7.2 kg |
|
Width (without stand) |
356.5 mm |
|
Depth (without stand) |
70.5 mm |
|
Height (without stand) |
464.5 mm |
|
Packaging content |
|
Cables included |
Power, USB Type-A to USB Type-B, DisplayPort |
|
Quick start guide |
Yes |
|
Other features |
|
Certification |
CB, CE / UKCA (Medical Device), ANSI/AAMI ES60601-1, CAN/CSA-C22.2 No. 60601-1, IEC/EN60601-1, VCCI-B, FCC-B, CAN ICES (B), RCM, RoHS, China RoHS, WEEE, CCC |
|
Save Quote
|
Save Quote
|
|
You must log in to save a quote.
|
|
|
|
vid:
|
